Skip to main content
loading site..
American Air Filter International
American Air Filter International
loading

Products

Pages

Resources

Products

We offer clarity in the quest for cleaner air. AAF provides trusted products that are the result of more than 100 years of experience and innovation in commercial air filtration. Browse these categories to find advanced solutions to meet your clean air challenges.

AstroSafe® V

AstroSafe V

AstroSafe® V

The AstroSafe V addresses the pharmaceutical industry's continuous concerns for safety. These innovative types of containment housings may also be used in other applications where the containment of dangerous or potent toxic compounds is prevalent and the ease of side servicing from within the conditioned space is a benefit.

AstroSafe® V

The AstroSafe V addresses the pharmaceutical industry's continuous concerns for safety. These innovative types of containment housings may also be used in other applications where the containment of dangerous or potent toxic compounds is prevalent and the ease of side servicing from within the conditioned space is a benefit.

Features
  • Meets all of the basic requirements of ASME NQA-1
  • Leak tested by the Pressure Decay Method in accordance with ASME N510-1995
  • Fluid-seal design utilizes a continuous knife-edge seal on the filter face and interior housing
  • Constructed from 304 stainless steel with a 2B standard finish
  • Features a side access bag-in/bag-out port
  • Replaceable filter locking arm mechanism
  • Static pressure taps are 1/4-inch stainless steel half couplings with brass hex plugs
  • Test ports are stainless steel 3/8-inch half couplings with brass hex plugs
  • Optional in-place testing shroud allows HEPA filters to be tested while in service
  • Lifting lugs are of 1/4-inch thick Type 304 stainless steel
  • Factory-installed Magnahelic® pressure gauges are available with and without transmitters
  • Prefilter section accommodates 2", 4" or 6" deep nominal-size prefilters
  • Primary filter section uses standard 24"x24", 24”x12” or 12”x12” HEPA filters in 11.5” depth
  • Bubble-tight dampers allow isolation of components during filter change

Industry Applications

Questions? We’re here to help.

Loading...