Visão geral do produto

  • Stainless steel frame with separator-style microglass media pack
  • For applications with requirements up to 1000°F (540°C) (exhaust air only) or 500°F (260°C) (supply air)
  • Gasket or fluid seal available (fluid seal has maximum service temperature of 390°F (199°C) 
  • Individually tested for certified performance, scan testing available (on 500° only)
Eficiência
  • HEPA
Profundidade do filtro
  • 12 pol
Tipo de meio
  • Fibra de vidro
Material da estrutura
  • Aço inoxidável

AAF Flanders manufactures metal-frame separator-style HEPA filters for applications with high-temperature requirements up to 1,000°F (540°C) for exhaust air only and 500°F (260°C) for supply air. High temperature filters are available with either a gasket or fluid seal. Filters with BluJel® Fluid Seal have a maximum service temperature of 390°F (199°C).

HEPA Filters

Each HEPA filter has a minimum efficiency of 99.97% on 0.30 micrometer size particles when tested at rated capacity on a Q-107 Penetrometer. Each filter is challenged with an approved nearly monodispersed oil aerosol of 0.30 micrometer size. By measuring the upstream and downstream concentration of these particles with a light scattering photometer, the penetration can be determined and the efficiency can be calculated.

Scan Tested HEPA Filters

Each scan tested HEPA filter has a minimum efficiency of 99.99% on 0.30 micrometer particles. Scan testing is in accordance with Section 6.2 of IEST-RP-CC034.1, HEPA and ULPA Filters Leak Tests. In the scan test, the filter is challenged with a high concentration of an approved oil aerosol or PSL (Polystyrene Latex Spheres). The media pack and pack-to-frame seal is scanned using a photometer or particle counter to ensure that there are no leaks greater than .01% of the upstream concentration at 100 FPM face velocity. Scan testing is only available for the 500°F (260° C) model.

Have Questions?