Visão geral do produto

  • Positive seal with spring-loaded fasteners and closed cell gasket
  • 16-gauge stainless or corrosion- resistant steel
  • Flush-mounted, totally-welded corners and deburred edges
  • Accommodates any standard size box or header type air filter
  • Easy to install and rugged with prepunched mounting holes, 3″ depth and centering dimples

The PF-1 Pureframe filter holding frame is a building block for built-up filter banks when incorporating ASHRAE rated air filters. It is designed to provide a high degree of sealing integrity while incorporating versatility in applications and accessibility in installation and service.

Superior Design and Construction

The PF-1 Pureframe is made with your choice of 304 stainless or 16-gauge corrosion resistant steel. All corners are mitered, continuously welded, and ground to form a smooth surface between the frame sealing surface and the gasket at the corner points of the sealing flange.

The PF-1 Pureframe has a nominal 3″ depth and a series of pre-punched mounting holes to facilitate alignment and assembly. Two rows of dimples are spaced to center the held filter and prefilter when both are used in combination in a single frame. Also, a series of pre-punched lances accommodate various types of stainless steel fasteners. A closed cell flexible gasket is attached to the sealing flange of each frame.

Para tamanhos e dados sobre desempenho:

Baixar o catálogo completo

Have Questions?