- Extremely quiet fan/motor assembly
- HEPA/ULPA filters are replaceable
- Filters are scan-tested after assembly to meet or exceed IEST RP-1 requirements for Type C and F filters
- DimplePleat® separatorless filter pack for a lightweight and low profile design
|Max Operating Temperature||
Pureflo FPM fan-powered terminal filter modules are lightweight unitized low profile units consisting of a fan/motor assembly and a mini-pleat HEPA/ ULPA filter pack, designed to provide unidirectional vertical airflow from tee-bar ceilings. The modules are available in two sizes: nominal 24″ x 24″ and 24″ x 48″, as a standard replaceable unit. Module efficiencies are 99.99% on 0.3 micron particles or 99.9995% on 0.12 micron particles.
Application & Installation Considerations
Pureflo FPM modules are recommended for use in cleanroom applications for fabrication of microelectronics, semiconductors, and medical devices.
The filters in standard modules are table-top replaceable with the entire unit removed from the ceiling. The filters are clamped into the fan plenum against a continuous knife-edge that is embedded into the gel for a leakproof seal. Removal of the filter does not disturb the enclosure. Neoprene gasketed filters are available as an option.
Modules include threaded inserts with ¼″ eyebolts at each top corner for the attachment of seismic restraint wires. Polyfoam gasket material should be applied to the tee-bar surfaces on which the modules rest.
For sizes and performance data:Download Full Brochure
|Pureflo FPM_Prod_Mark_Sht_AFP 1 372B||