- Rigid all-metal construction and water-resistant media in a supported pleat-type configuration
- Can be used in systems with difficult operating conditions, including:
- Variable air volume
- Turbulent airflow
- Repeated fan shutdown
- High temperature
- High humidity
- Intermittent exposure to water, such as sea coast installations
|Max. Operating Temperature||
High Efficiency - Low Resistance
Rated at 95% efficiency on 0.3 micrometer challenge aerosol, classification E10 to EN1822:2009, the BioCel I filter has the advantage of a much lower pressure drop than a typical HEPA filter.
BioCel I filters fill the gap between high-efficiency filters and ultra-high efficiency HEPAs at half the weight and pressure drop. This compact, lightweight filter will withstand operating temperatures to 120 °C if recommended final resistance is not exceeded. To maximise filter life, use BioCel filters with high-quality AAF International's prefilters.
Ideal for Variable Volume Systems Construction
BioCel I filters consist of a pleated media pack enclosed in a galvanised steel frame assembly. The media is made of ultra-fine fibreglass formed into a series of pleats. Corrugated aluminium separators maintain uniform spacing between each pleat to allow unrestricted airflow through the filter. Bar braces are installed on both sides of the filter for extra reinforcement of the media pack. A flattened, expanded faceguard installed on both sides of the filter is available as an option.
BioCel I filters have a single-piece galvanised steel header on the air-entering side that is interlocked to the cell sides in a patented fashion, preventing leakage and forming a totally rigid construction.